Water and mobile phones never go along the same line. The world freezes as soon as you drop your mobile phone in water. Although it happens accidentally still it may cost you a lot for a new phone. Mobile phones repaired from water damage have very fewer chances to work in a smooth manner. You don’t have to sweat when you have a high-end phone like the Huawei P30 Pro or Samsung Galaxy S10. These phones are waterproof phones.
More and more handset makers are turning to waterproof models for their devices. This mean their cost will be sky high and to afford them would be very difficult. All together for the maximum user, they have to switch to other methods that can save their phone. The best way to protect a mobile phone from water damage is by using a waterproof pouch. Therefore this might work for situations where you know you might be making contact with water.
But what if you are late and the mobile phone is already in contact with water? The chances are pretty low and nothing can guarantee the recovery of the device. The damage may be permanent. But still, some way can come in handy. So what should be the proper care for a water damage phone and what are the steps that should you follow when these accidents occur, let’s have a look.
Water dopped phone should be turned off
I know how hard it is to react to such a situation but still, you should try to be as quick as possible to take the phone out from the water. Longer the stay of the mobile device in water makes its chances to survive fewer. Once the phone is out from the water, quickly try to turn it off. Although after turning it off it should stay the same for a day or so for the safety of the device. The device should find a flat surface with a paper towel so that the moisture can be absorbed. Nowadays the maximum phone can resist water up to a point, which can work in your favor.
Dont’s during the water damage
- Switch off your phone
- Don’t charge the phone.
- Pressing any key can allow water to go further in the device, so don’t press any key.
- Don’t use blowers.
- Never shake the phone.
- Don’t apply any external heat.
- Never move the phone from a flat surface.
Dismantle the water damaged phone
This step requires precautions. If you were never into the tech assembly profession then you should read carefully about the steps. The removable parts of the phone such as the back cover, back panel cover, SIM card, memory card, and the battery should be removed from the phone. Usually, nowadays the user cannot remove the battery by himself.
If you know how to dismantle the whole phone then do that quickly as it can help in drying the parts even quickly and efficiently. Usually, the user cares about the warranty during the operation, if you have a store nearby then rush to it otherwise do it yourself voiding the warranty.
Using paper towel
Paper can quickly soak up the extra moisture from any surface. The paper towel is the best line of defense when you are trying to rescue your phone. Try to soak up the moisture present on the outside near the screen vents and speakers. While doing so don’t move the phone parts much. Excess water will find its way inside the phone when moved so better to keep the phone still.
Try using small suction pipes
We all know blowers can make the water spill in all directions. It also creates heat which is not appropriate for mobile hardware. But vacuum cleaners come in handy when you are trying to get the excess water out from the mobile device.
Try to run in on the lowest power as possible or use regulated power supply and try the suction process from all the vents near the speaker and mic. Then try drying off the inside components water. This process will take time but it can save your device from any permanent damages.
Time is the key
There is an old traditional way of saving water dropped phone. It takes too much time but the process is quite effective and is available for everyone. If you don’t have vacuum cleaners or don’t know how to dismantle your phone then try this method. The traditional method keeps the phone in a rice bag. Rice absorbs moisture effectively and is easily available in everyone’s home. So fill the rice in a ziplock bag and leave the phone inside it for 2 days. Rice will absorb the moisture and the phone should be dry as ever.
Another alternative is the silica gel packs. Keep the phone inside the silica get packs and it could speed up the process of soaking up the moisture. The silica gel packs can soak up 700 times faster than rice bags. So we would suggest you to use this. Down below you can find a link to purchase it.
Checking back on Phone
So now comes the most awaiting part of this drill. Firstly your phone was inside the water and you have followed some of the steps mentioned above. Now is the time to check it back. For rice stack recovery you have to wait for 2-3 days. For every other, you have to wait for a minimum of 2 days. Now connect the charger and turn on the phone. If it succeeds then check every component such as earpiece, speakers, camera, and sensors. If the phone does not start then its a defeat and its better to get a new phone.